Midronome Community

Hey there!
In the settings of Midronome one can define the speed for analog clock 1 and analog clock 2.
I’m wondering what analog clock 2 is. Does it run parallel to analog clock 1? Does it mean I can sync analog hardware that uses different clock versions at the same time? And, if so, where is the output for the signal of analog clock 2?
Thanx and best regards
Julian

Hi Julian

Thanks for registering and asking here

You're exactly right. And the output for analog clock 2 is on the right/ring channel of the ANLG port. To access them both you'll need a simple TRS->2xTS splitter cable, for example this one: https://www.thomann.de/de/cordial_cfy_03_wyy.htm

Cheers
Simon

Hey Simon!

Thanks for the super fast reply

Maybe I’m missing something, but isn’t the splitter you recommended 1x trs to 2x trs?

Wouldn’t it need something more like this?:

https://www.thomann.de/de/native_instru ... _cable.htm

Ha sorry you're right I went a bit too fast. TRS to 2xTRS will not work indeed as it will simply copy the signal two times.

The one you found will work