Search found 665 matches

by Simon
12 Dec 2023, 12:31
Forum: Questions about the Midronome
Topic: Syncing Midronome to eurorack
Replies: 4
Views: 1644

Re: Syncing Midronome to eurorack

Glad you asked! :D If you configure the ANLG output as "DIN Sync", it will have a start/stop gate on the right/ring part of the plug, and run at 24ppq on the left/tip part of the plug (as per vintage Roland devices require on a DIN Sync plug). But Firmware 3.0 will come with a full Reset i...
by Simon
11 Dec 2023, 22:22
Forum: Potential future features
Topic: Midronome Add-on Modules!
Replies: 19
Views: 7785

Midronome Add-on Modules!

Hey guys :D So the module designs are coming soon. So far I have 6 designs ideas, which are listed on https://survey.midronome.com/ (and in the picture below) I suggest you go on that page and cast your vote as well ;) Note that the "big" module with Ableton Link, Beat Detection and Blueto...
by Simon
11 Dec 2023, 10:07
Forum: Questions about the Midronome
Topic: My Set Up working 100% on Ableton how i did it.
Replies: 4
Views: 2063

Re: My Set Up working 100% on Ableton how i did it.

dheeraj wrote: 11 Dec 2023, 06:15 yeah i did try that too but iwas getting some latency so i finally stuck to this method.
Interesting :) And adjusting the clock delay in Ableton was not good enough to remove the latency?

Simon
by Simon
10 Dec 2023, 15:37
Forum: Questions about the Midronome
Topic: USB hub
Replies: 1
Views: 1525

Re: USB hub

Hi sineman, thank you for asking here! You can technically use software to forward the clock sent by the Midronome (over USB) to your devices (also over USB). But in this case the clock goes: Midronome -> USB cable -> computer -> forwarding software -> USB cable -> sequencer (on Mac, you can use for...
by Simon
10 Dec 2023, 15:31
Forum: Questions about the Midronome
Topic: My Set Up working 100% on Ableton how i did it.
Replies: 4
Views: 2063

Re: My Set Up working 100% on Ableton how i did it.

Thank you Dheeraj for sharing!! :D Very happy to hear you found a way that works for you. Just FYI you can get Ableton to follow the Midronome simply over USB by activating the "External sync" in Ableton. This way you do not need the extra cable and Tempo Follower. It's explained here: htt...
by Simon
08 Dec 2023, 10:07
Forum: Questions about the Midronome
Topic: 2 diffrent tempo's
Replies: 5
Views: 2213

Re: 2 diffrent tempo's

Oh actually I did not think of this, but yes it would work: 2 Midronomes, one (slave) set with inP=2.4.P. and the the other as master, with An.L=PLA and An.1=12 Then connect a cable from the ANLG output of the master to the INPUT of the slave. Then press Play and there you go your slave is running a...
by Simon
07 Dec 2023, 14:26
Forum: Questions about the Midronome
Topic: Midi forwarding interfaces out 1&2 not available on AUM (iPad)
Replies: 8
Views: 2893

Re: Midi forwarding interfaces out 1&2 - AUM

Hi all - after quite a few emails back and forth with HDGMax, I've come to the conclusion that this is related to the Note from section 4 of the User Guide , as shown in the attachment. So my guess is, like on MacOS, on iPadOS (and iOS probably?), if the Midronome is connected to the iPad before upg...
by Simon
07 Dec 2023, 11:18
Forum: Questions about the Midronome
Topic: Still strugglign with Midi Jitter/Delay in Ableton
Replies: 26
Views: 8774

Re: Still strugglign with Midi Jitter/Delay in Ableton

Fair point Peter, thank you - you were right disabling the monitoring was not very clear in the "How to sync with DAWs" PDF, it's now corrected. I'm not sure what you mean with the external audio device should be on the plugin's track? Like I show on the video, you simply need to drag and ...
by Simon
07 Dec 2023, 09:10
Forum: Questions about the Midronome
Topic: Please Help _total Noob! :( Exploding Brains.
Replies: 11
Views: 3192

Re: Please Help _total Noob! :( Exploding Brains.

Ok - well that's progress. Then you just have to keep following my steps ;) If you do hear the buzz, then connect a cable from that output to the Midronome "INPUT" plug. At this point the sync might work. If it still does not, try the following: Try turning the volume up Make sure the buzz...
by Simon
06 Dec 2023, 22:04
Forum: Questions about the Midronome
Topic: Still strugglign with Midi Jitter/Delay in Ableton
Replies: 26
Views: 8774

Re: Still strugglign with Midi Jitter/Delay in Ableton

Sorry to hear Peter. Denis' manual is very specific to Ableton, I doubt it can easily be adapted for Bitwig. The problem is there are so many DAWs, and possible configurations - it's not possible to make a manual for every single one. I often give support and help people with things which are not Mi...
by Simon
06 Dec 2023, 10:49
Forum: Questions about the Midronome
Topic: 2 diffrent tempo's
Replies: 5
Views: 2213

Re: 2 diffrent tempo's

I see - well usually the clock is the clock, then divisions or multiplications like this would be done by the receiving devices I'd say? Maybe investigate if your devices can do this ;) Alternatively, this is very easily possible using an add-on module - simple module designs are coming very soon, t...
by Simon
05 Dec 2023, 23:34
Forum: Midronome Bug Reports
Topic: [R] Buz in the audio output
Replies: 1
Views: 1808

Re: Buz in the audio output

Hi :) Sorry about that. It's a known issue, and there are plenty workarounds (the quickest being: use a TRS/stereo/balanced cable). See this topic: https://forum.midronome.com/viewtopic.php?t=199 Cheers Simon PS: I am locking this topic, feel free to write in the original topic if you have questions...
by Simon
05 Dec 2023, 14:52
Forum: Questions about the Midronome
Topic: 2 diffrent tempo's
Replies: 5
Views: 2213

Re: 2 diffrent tempo's

Hi :)

Thanks for the question! Unfortunately this is not possible - why would you need two devices running at different tempos?

Simon
by Simon
05 Dec 2023, 13:59
Forum: Questions about the Midronome
Topic: Please Help _total Noob! :( Exploding Brains.
Replies: 11
Views: 3192

Re: Please Help _total Noob! :( Exploding Brains.

I understood, Dheeeraj, but thanks for the extra clarification :) What I mean with "buzz" is not the metronome click, it's a loud buzz that should be coming out of the plugin (i.e. out of your audio interface ). Something similar to this - https://files.midronome.com/MidroSync-examples/125...
by Simon
02 Dec 2023, 11:30
Forum: Potential future features
Topic: Negative Offset/Shift/Latency
Replies: 29
Views: 14476

Re: Negative Offset/Shift/Latency

Is there a way to add a mode (or if this is already possible without muting the channel of the plug in, via some setting, please let me know how...its my 2nd day with the Midronome) where pressing "PLAY' will give *instantaneous* clock output from the Midronome? As it is I can only get it to s...
by Simon
02 Dec 2023, 10:07
Forum: Potential future features
Topic: Negative Offset/Shift/Latency
Replies: 29
Views: 14476

Re: Negative Offset/Shift/Latency

It can be done in the DAW of course, especially Ableton that is very easy to do this sort of thing, but in my other DAW which is Reaper, I have to use a plug in (ReaInsert) that induces over 4400 samples of latency...just to offset the Midronome back for like 11 msec. You want a negative delay, and...
by Simon
01 Dec 2023, 22:58
Forum: Questions about the Midronome
Topic: Midi forwarding interfaces out 1&2 not available on AUM (iPad)
Replies: 8
Views: 2893

Re: Midi forwarding interfaces out 1&2 - AUM

Ok that's awesome news :D
What's the MIDI Hub you connected?
by Simon
01 Dec 2023, 13:49
Forum: Questions about the Midronome
Topic: Please Help _total Noob! :( Exploding Brains.
Replies: 11
Views: 3192

Re: Please Help _total Noob! :( Exploding Brains.

Hi Dheeraj, Did you add the Midronome plugin on an empty track, and then route that track to a dedicated output on your RME? If so, could you please test this works, by plugging a pair a headphones on that output: you should hear a very loud buzz (when Ableton is playing). If you do not hear the buz...
by Simon
01 Dec 2023, 13:34
Forum: Questions about the Midronome
Topic: Midi forwarding interfaces out 1&2 not available on AUM (iPad)
Replies: 8
Views: 2893

Re: Midi forwarding interfaces out 1&2 - AUM

Thanks for the feedback - interesting results, it seems AUM can see the input devices fine but not the output ones? :shock: That last test shows that everything is fine with your Midronome, as Windows can see the last two output devices (which are the MIDI Out 1 and MIDI Out 2 - Windows is just not ...
by Simon
30 Nov 2023, 15:41
Forum: Questions about the Midronome
Topic: Please Help _total Noob! :( Exploding Brains.
Replies: 11
Views: 3192

Re: Please Help _total Noob! :( Exploding Brains.

Hi Dheeraj Thanks for writing here :) Let's try this one step at a time: first get the Midronome to follow the tempo from Ableton. For this, you'll to: 1. install the Midronome VST plugin 2. load it on a track in your Ableton session 3. route that track to a dedicated output on your RME (nothing els...
by Simon
30 Nov 2023, 10:42
Forum: Questions about the Midronome
Topic: Midi forwarding interfaces out 1&2 not available on AUM (iPad)
Replies: 8
Views: 2893

Re: Midi forwarding interfaces out 1&2 - AUM

Hi :) It sounds like AUM only uses the first interface from each device. Could you check if you can see both INs interfaces (Clock only and Clock & Start)? If you cannot, it confirms my theory - the AUM only sees one pair of IN/OUT interface per device. If that is the case, unfortunately there i...
by Simon
28 Nov 2023, 15:00
Forum: Feature requests (Discussions & debates)
Topic: Bi-directional DAW Sync
Replies: 4
Views: 6975

Re: Bi-directional DAW Sync

HappyClocker wrote: 28 Nov 2023, 13:32 Ah, I see, didn't get that Nome = Midronome. :oops:

I deleted my posting to avoid confusion.
No worries at all!
I was wondering if that name was starting to take... :D
by Simon
28 Nov 2023, 09:49
Forum: Feature requests (Discussions & debates)
Topic: Bi-directional DAW Sync
Replies: 4
Views: 6975

Re: Bi-directional DAW Sync

I'm afraid you misunderstood this. The Midronome as Clock and Transport Master is already possible (for Ableton at least): simply activate external sync in Ableton. But this has a few issues, the precision (since it is over USB-MIDI) for one, but also as you mentioned the latency (though you should ...
by Simon
28 Nov 2023, 09:42
Forum: Other questions
Topic: Sync Style Start/Stop from Yamaha SX700
Replies: 1
Views: 2860

Re: Sync Style Start/Stop from Yamaha SX700

Hi Jonatas :) In this setup the 'Nome (nickname for the Midronome - invented by the community :D ) should be the master. It will send MIDI Clock to your SX700, and ideally you want to start the SX700 by pressing the Play button on the Nome. This way it will be in time with anything else connected to...
by Simon
28 Nov 2023, 09:21
Forum: Questions about the Midronome
Topic: Still strugglign with Midi Jitter/Delay in Ableton
Replies: 26
Views: 8774

Re: Still strugglign with Midi Jitter/Delay in Ableton

Awesome! Thanks for sharing :)

Which manual are you speaking about? Denis' or the "How to sync with DAWs"?

Cheers
Simon
by Simon
27 Nov 2023, 10:05
Forum: Other questions
Topic: NDLR settings
Replies: 1
Views: 2545

Re: NDLR settings

I do not think anyone has tried this yet? Looking at the NDLR manual - https://conductivelabs.com/wp-content/uploads/2020/02/The-NDLR-User-Manual-v1.7.pdf - it looks like it should just work fine? (see page 34) Once you found out, it would be nice to add it to the compatibility sheet: https://docs.g...
by Simon
27 Nov 2023, 09:59
Forum: Feature requests (Discussions & debates)
Topic: Bi-directional DAW Sync
Replies: 4
Views: 6975

Bi-directional DAW Sync

Hi :) Quite a few people seem to be asking for this, and there is no topic to discuss it. The idea is to sync the Nome tightly to your DAW using the plugin, but at the same time to let your DAW be controlled by the Midronome. I think this could work if: DAW -> Nome is a synchronisation (i.e. tight) ...
by Simon
27 Nov 2023, 09:58
Forum: Questions about the Midronome
Topic: How to link tempo knob to DAW tempo (before hitting play button)?
Replies: 1
Views: 2266

Re: How to link tempo knob to DAW tempo (before hitting play button)?

Hey Rob Well I'd say it's amazing you already got it working both ways this far - I'm pretty sure you are the first! To answer your question - it must be a FL Studio setting, that the MIDI Clock is only taken into account when the DAW is playing. The Nome sends MIDI Clock constantly (expect in 2.4.P...
by Simon
27 Nov 2023, 09:44
Forum: Questions about the Midronome
Topic: Still strugglign with Midi Jitter/Delay in Ableton
Replies: 26
Views: 8774

Re: Still strugglign with Midi Jitter/Delay in Ableton

denisskok wrote: 22 Oct 2023, 17:23 I have made a manual :D
Denis maybe you have an idea of what is going on with Peter's setup?

But otherwise Peter I'd say simply use the track delay to add a positive delay to the Midronome plugin track of 16ms and it should be on the grid?
by Simon
24 Nov 2023, 10:27
Forum: Questions about the Software Tools
Topic: Logic AU Plugin automatically disabled when switching project
Replies: 5
Views: 5275

Re: Logic AU Plugin automatically disabled when switching project

Ok I found the answer: https://support.apple.com/en-us/101962

If I am not mistaken you just need to create an empty MIDI region in your Midronome track and the plugin will not be deactivated. Let me know if that works ;)

Simon