Search found 665 matches

by Simon
Today, 12:20
Forum: Questions about the Midronome
Topic: Recording hardware into Ableton delay
Replies: 1
Views: 42

Re: Recording hardware into Ableton delay

Hi :) This does look like a very large delay indeed. You said the TR8S is connected via USB, but it is sync'ed to the Midronome, correct? If not -> clearly that's the issue :D If it is -> it could be the MIDI note you are sending from Ableton over USB which gets a delay. Make sure delay compensation...
by Simon
22 Mar 2024, 19:31
Forum: Potential future features
Topic: Negative Offset/Shift/Latency
Replies: 29
Views: 14482

Re: Negative Offset/Shift/Latency

Hi Mark

No it is not. Add-on modules have been delayed by the release of Firmware 3.0 unfortunately.
They will probably out at the same time as the next batch, next summer :)

Simon
by Simon
14 Mar 2024, 08:59
Forum: Potential future features
Topic: Start/Reset for ANLG output
Replies: 10
Views: 6332

Re: Start/Reset for ANLG output

sorry for the late response, seems I am not getting email notifications from the forum. No worries at all, and if you want to receive notification emails you can turn them on here: https://forum.midronome.com/ucp.php?i=ucp_notifications&mode=notification_options Thanks for the long feedback abo...
by Simon
14 Mar 2024, 08:54
Forum: Midronome Bug Reports
Topic: Analogue clock signal options
Replies: 1
Views: 33

Re: Analogue clock signal options

Thanks for creating a separate topic :) You did not follow the template though, so I am missing some information (in particular your firmware version). Could you please edit your post and follow this template: Short description of the issue : Setup (devices connected to the Midronome and how): Steps...
by Simon
13 Mar 2024, 19:49
Forum: Questions about the Midronome
Topic: Hum Issue
Replies: 2
Views: 49

Re: Hum Issue

Yes this fit perfectly the description of this well-known issue.
Unfortunately it's a hardware issue, caused when you have a ground loop in your setup.

There are many workarounds and solution - see the linked post ;)

Simon
by Simon
11 Mar 2024, 08:55
Forum: Questions about the Midronome
Topic: Syncing OXI ONE to Midronome
Replies: 16
Views: 3329

Re: Syncing OXI ONE to Midronome

Hi Scott Very sorry to hear - we investigated this issue heavily with Jandt (who created this topic), I also spoke about it with Manu (who designed the OXI One). The conclusion is the original OXIs have a slightly different MIDI input design which is very sensitive to tolerances - if you get a newer...
by Simon
11 Mar 2024, 08:40
Forum: Questions about the Software Tools
Topic: Ableton 12 + plugin?
Replies: 1
Views: 86

Re: Ableton 12 + plugin?

Ha glad to hear :)
I have not tested the plugin in Ableton 12 indeed, but I do not see any reason why it would not work ;)

Let us know if there is anything else ;)

Simon
by Simon
11 Mar 2024, 08:36
Forum: Potential future features
Topic: ROADMAP for Firmware 4.0
Replies: 4
Views: 871

Re: ROADMAP for Firmware 4.0

Hi Max :) That's fair, definitely a few months, not years. Difficult and complex features are the ones that take time, for example the one that is coming with Firmware 3.0. Once this is out I will start working on Firmware 4.0, and its difficult feature is the improved tap tempo, which is the only o...
by Simon
05 Mar 2024, 12:07
Forum: Questions about the Midronome
Topic: Jitter using as master clock (hardware only)
Replies: 2
Views: 84

Re: Jitter using as master clock (hardware only)

Interesting! My guess is that when you activate sync, the beatbuddy syncs to the incoming clock (from the Midronome) but then generates its own clock for your looper, which gets out of sync from the original Midronome clock… ? Could you try re-arranging the wires to get the Midronome to send the clo...
by Simon
05 Mar 2024, 12:04
Forum: Questions about the Midronome
Topic: PLAY button
Replies: 1
Views: 35

Re: PLAY button

Hi :) Thanks for the suggestion! I think this would be difficult, both because it might be specific to your setup but also because even if other people have the same setup they would need a different note so it needs to be configurable somewhere. The easiest workaround is to send the note you want o...
by Simon
29 Feb 2024, 11:11
Forum: Potential future features
Topic: Start/Reset for ANLG output
Replies: 10
Views: 6332

Re: Start/Reset for ANLG output

I have been having reliability issues with my Korg SQ-1 when syncing it via analogue to the Midronome. Every now and then, it would jump a few steps and get out of sync. I see - great info! All your ideas seem to be very on point :) Would you mind creating a post about it in the “Midronome Bugs Rep...
by Simon
29 Feb 2024, 11:06
Forum: Questions about the Midronome
Topic: Still strugglign with Midi Jitter/Delay in Ableton
Replies: 26
Views: 8774

Re: Still strugglign with Midi Jitter/Delay in Ableton

Bruno wrote: 07 Dec 2023, 16:54 Somehow the advises in the manual from denis dosen`t solve my latency problem, also not with external audio effect.
Wait a few more weeks for Firmware 3.0 - that might solve your issues ;)

Simon
by Simon
19 Feb 2024, 01:15
Forum: Questions about the Midronome
Topic: Trying to understand syncing DAW/Midronome/Ext Hardware
Replies: 14
Views: 3660

Re: Trying to understand syncing DAW/Midronome/Ext Hardware

but all the jitter is still happening between the daw and midronome? so the midronome stabilizes it? Well no that's the point, the Midronome uses the audio clock as a reference, so the only jitter it gets is the audio clock's jitter (which is usually very low ) +/- 0.5 samples. When you sync stuff ...
by Simon
18 Feb 2024, 10:07
Forum: Midronome Bug Reports
Topic: midronome not working with mrcc
Replies: 2
Views: 132

Re: midronome not working with mrcc

Thanks for reporting! I assume with "plugging the Midronome into the MRCC" you mean using USB - if not please let me know. That's going to be a toughie, and I'm afraid to say it probably is a bug on the MRCC (my first guess is that it cannot handle the multiple USB-MIDI interfaces of the M...
by Simon
18 Feb 2024, 10:01
Forum: Questions about the Midronome
Topic: Trying to understand syncing DAW/Midronome/Ext Hardware
Replies: 14
Views: 3660

Re: Trying to understand syncing DAW/Midronome/Ext Hardware

so... a clock taking the route of daw>midronome>hardware is more stable than just daw>hardware? Ha ha that does go against natural judgement indeed :D :lol: The key point is the first line. If I call 1, 2 and 3 the communication lines: daw ---> midronome ---> hardware 1---^ 2---^ daw ---> hardware ...
by Simon
18 Feb 2024, 09:44
Forum: Potential future features
Topic: Midronome Add-on Modules!
Replies: 19
Views: 7785

Re: Midronome Add-on Modules!

I understood that as having the need for an additional power plug for the module, for example another USB port.
That will be the case for a big module that uses a lot of power which would be too much to get from the module interface.
by Simon
17 Feb 2024, 11:36
Forum: Potential future features
Topic: Midronome Add-on Modules!
Replies: 19
Views: 7785

Re: Midronome Add-on Modules!

Well actually the circuit could not be simpler, the module will simply attach to the current device, no other power supply needed (for now all modules will follow this idea actually). The only difficulty is that MIDI Clock (sent on the Midronome's module interface as well, but it would be the same w...
by Simon
14 Feb 2024, 23:26
Forum: Potential future features
Topic: Midronome Add-on Modules!
Replies: 19
Views: 7785

Re: Midronome Add-on Modules!

Hey Tim :) Yes it's definitely planned and will come in a few months hopefully. The modules have been slightly delayed by the coming release of FW 3.0, but they will get there eventually ;) Note that, at first, the modules will only be designs (which will be free), but I will guide you to fabricate ...
by Simon
08 Feb 2024, 17:11
Forum: Questions about the Midronome
Topic: Configure Ableton for Midronome
Replies: 6
Views: 386

Re: Configure Ableton for Midronome

In the video and also in the manual it says that „Locked“ only lights up for each bar - in my case its always on. I see - the manual says that the Midronome syncs and the LED lights up after one bar, which is the case in 24P mode (it takes one bar to start the sync). In "2.4.P." mode it s...
by Simon
08 Feb 2024, 16:43
Forum: Questions about the Midronome
Topic: Configure Ableton for Midronome
Replies: 6
Views: 386

Re: Configure Ableton for Midronome

Oh I see, it was syncing fine, but you were wondering why the Locked LED was on? Ha my bad I misunderstood :D Well if it's syncing fine then all is good - and yes when it's syncing the Locked LED turns on, to let you know precisely that your Midronome is sync'ed (i.e. "locked") to your DAW...
by Simon
08 Feb 2024, 14:55
Forum: Questions about the Midronome
Topic: Configure Ableton for Midronome
Replies: 6
Views: 386

Re: Configure Ableton for Midronome

Hi :) Sorry about the small mistake in the manual - you're correct it needs to be a MIDI track not an audio track. Anyways you've got past that now :) Regarding the current issue: when the Locked LED is on it means the tempo is locked (to the DAW). What happens when you turn the large knob, does the...
by Simon
05 Feb 2024, 10:29
Forum: Potential future features
Topic: ROADMAP for Firmware 4.0
Replies: 4
Views: 871

Re: ROADMAP for Firmware 4.0

Correct ;)
by Simon
30 Jan 2024, 09:14
Forum: Potential future features
Topic: ROADMAP for Firmware 4.0
Replies: 4
Views: 871

ROADMAP for Firmware 4.0

This is the potential roadmap for firmware 4.0. ETA : no ETA for now. New Major Features: Tempo presets - https://forum.midronome.com/viewtopic.php?t=211 Sync to 1-12ppq signal + improved tap tempo - https://forum.midronome.com/viewtopic.php?t=268 New Minor Features: Assign a number to change USB de...
by Simon
27 Jan 2024, 14:35
Forum: Welcome!
Topic: Bonjour
Replies: 1
Views: 640

Re: Bonjour

Hello Vincent, welcome to the community, very glad to have you here!! :D :D

Simon
by Simon
27 Jan 2024, 10:08
Forum: Questions about the Midronome
Topic: Live use with MC6PRO midi controller
Replies: 5
Views: 1190

Re: Live use with MC6PRO midi controller

Hi :) So it seems that: The MC6Pro is sending data only to the first USB-MIDI interface (i.e. MIDI Commands), which explains why you can control the Midronome but not get it to forward data (as that would require sending MIDI to the second and third USB-MIDI interfaces) The MC6Pro and the Midi Monit...
by Simon
25 Jan 2024, 07:52
Forum: Questions about the Midronome
Topic: MIDI path suggestions?
Replies: 1
Views: 776

Re: MIDI path suggestions?

Hi :) That setup sounds fine to me - you could also sync the Midronome to Ableton using the plugin and then sync everything else (including the Elektron stuff) to the Midronome via MIDI and/or DIN and/or analog clock. I am not sure why the MIDI Hub is not working the Midronome, that is very strange....
by Simon
25 Jan 2024, 07:44
Forum: Other questions
Topic: replacing USAMO with Midronome
Replies: 5
Views: 1734

Re: replacing USAMO with Midronome

juradub wrote: 23 Jan 2024, 21:07 You mentioned there's none in stock, but is there any way i can pre-order, join a waiting list, or pay upfront ahead of the next batch release?
Yes simply join the mailing list (at the bottom of the website www.midronome.com ) :)

Simon
by Simon
22 Jan 2024, 23:44
Forum: Questions about the Midronome
Topic: Live use with MC6PRO midi controller
Replies: 5
Views: 1190

Re: Live use with MC6PRO midi controller

Hi :) Yes it sounds like you figured it all out - looking forward to hearing what the tests show ;) Note that you to send commands to the Midronome from the MC6Pro you will need to send them to the first USB-MIDI input interface (called "Midronome Commands"), and only on channel 12 as you ...
by Simon
20 Jan 2024, 15:47
Forum: Other questions
Topic: replacing USAMO with Midronome
Replies: 5
Views: 1734

Re: replacing USAMO with Midronome

Hi :) If a session in Logic X for example, is running at 118bpm and I want to start the clocks/sync at bar 65 and not bar 1, will it do so? The DAW is the Master Clock yeah? (my eurorack system is a mixture of Din Sync and midi to CV fed into the Squarp Pyramid sequencer). Yes Logic is the master. T...
by Simon
18 Jan 2024, 22:35
Forum: Questions about the Midronome
Topic: Android BandHelper with Midronome MIDI cc
Replies: 19
Views: 6149

Re: Android BandHelper with Midronome MIDI cc

Oh I see, my bad :) Well my first guess would be that the new Android or BH does not like the multiple MIDI interfaces on the same device, since that audio interface only has one MIDI in and one MIDI out which is much more standard. Just a thought, could you try firmware 2.1 (which is a beta firmwar...