Search found 682 matches
- Yesterday, 22:01
- Forum: Questions about the Midronome
- Topic: How to send tempo/start/stop to Midronome from hardware?
- Replies: 3
- Views: 13
Re: How to send tempo/start/stop to Midronome from hardware?
In any case, starting with Reset On aka "rewind" would be a suitable option for me. I'm not sure what you mean but check the Midronome User Guide, there are quite a few options to start/stop/rewind depending on which message you send, I believe you'll find something that suits you ;) Simon
- Yesterday, 11:51
- Forum: Questions about the Midronome
- Topic: How to send tempo/start/stop to Midronome from hardware?
- Replies: 3
- Views: 13
Re: How to send tempo/start/stop to Midronome from hardware?
Hi :) Yes using the "Midronome Commands" USB interface is the way to go, and yes unfortunately since the device does not have any DIN-MIDI input, for now this is the only way. Hardware add-on modules will eventually come out, one of them will be a MIDI input module so you can send these sa...
- 23 Apr 2024, 13:33
- Forum: Potential future features
- Topic: Tempo Decimals - BPM in XXX.YY
- Replies: 2
- Views: 9488
Re: Tempo Decimals - BPM in XXX.YY
Thank you Novoline for this long and thorough information! :) It would be a useful feature I agree and you make something very good points ;) It's still in my mind to implement it eventually, maybe Firmware 4.0 or one after that, things just take time. So far no ETA or roadmap for this. Cheers Simon...
- 23 Apr 2024, 13:26
- Forum: Questions about the Midronome
- Topic: Tell Midronome to Stop drum machine?
- Replies: 5
- Views: 55
Re: Tell Midronome to Stop drum machine?
Ok I see, yes that might be the issue
Let me know how it goes, and just an idea: try deleting the Midronome from the Windows Device Manager then unplug/replug to clean it, it could also be the source of the problem.
Let me know how it goes, and just an idea: try deleting the Midronome from the Windows Device Manager then unplug/replug to clean it, it could also be the source of the problem.
- 23 Apr 2024, 13:24
- Forum: Questions about the Midronome
- Topic: Syncing OXI ONE to Midronome
- Replies: 19
- Views: 3448
Re: Syncing OXI ONE to Midronome
As a trouble-shooting effort, I want to disable the midi-out via USB on the Midronome , but I couldn't find how to in the manual. So I came here to ask if it's possible and how to do it. I am not sure what you mean, you want to disable the USB communication, or the clock on the DIN-MIDI ports? None...
- 22 Apr 2024, 12:31
- Forum: Questions about the Midronome
- Topic: Tell Midronome to Stop drum machine?
- Replies: 5
- Views: 55
Re: Tell Midronome to Stop drum machine?
Hi John Yes that should definitely work. Please check that you are sending to the right USB-MIDI (Midronome Commands and not MIDI Out 1 or 2). It sounds like you are sending the correct MIDI message (see attachment). What happens when you press the play button on the device, does your drum machine s...
- 18 Apr 2024, 13:25
- Forum: Questions about the Midronome
- Topic: Getting the Midronome to follow SiparioX
- Replies: 3
- Views: 174
Re: Getting the Midronome to follow SiparioX
Can I use any external audio click to sync Midronome? Or do I have to use MidroSync File Generator to generate a specific audio to sync it? Any sharp audio signal sent at 24ppq (every 64th triplet note) will work. Yes you can use the MidroSync File Generator, that will work as well. A metronome is ...
- 16 Apr 2024, 08:09
- Forum: Questions about the Midronome
- Topic: Getting the Midronome to follow SiparioX
- Replies: 3
- Views: 174
Re: Getting the Midronome to follow SiparioX
Hi :) No I'm sorry but it cannot, and if it could it would only create problems as syncing with a MIDI Clock sent over USB is generally a bad idea. The Midronome works best when it runs as a master, so if you can rearrange your setup to make it the master, it's definitely better. In case you really ...
- 12 Apr 2024, 09:16
- Forum: Midronome Bug Reports
- Topic: [F] Midronome PLAY flashes after DAW is stopped when using 2.4.P.
- Replies: 9
- Views: 3036
Re: [F] Midronome PLAY flashes after DAW is stopped when using 2.4.P.
Ha ha yes I forgot quite an important thing: all sync modes start right away now, so the 2.4.P. mode is not necessary. But in any case with Firmware 3.0 you'll want to use the new fancy stuff instead of 24P mode... he he very exciting things you'll see
- 11 Apr 2024, 17:03
- Forum: Feature requests (Discussions & debates)
- Topic: Stop the MIDI Clock with the PLAY button
- Replies: 11
- Views: 11283
Re: [DONE] Disable master mode when syncing to DAW
Please note that this is not "un-done", as 2.4.P. mode has been removed in Firmware 3.0. The plan is to implement in the not-so-far future an additional setting to simply stop sending the clock when pressing Stop on the device. Please let me know if this is important to the community :) Ch...
- 11 Apr 2024, 16:48
- Forum: Feature requests (Discussions & debates)
- Topic: [DONE] Midi forwarding: Overcoming the 125 byte-limit
- Replies: 4
- Views: 1371
Re: Midi forwarding: Overcoming the 125 byte-limit
The limit will be increased as part of Firmware 3.0, to 500 bytes instead of 125.
- 11 Apr 2024, 16:47
- Forum: Feature requests (Discussions & debates)
- Topic: Analogue clock signal options
- Replies: 2
- Views: 66
Re: Analogue clock signal options
Moving this topic to feature requests where it belongs
- 11 Apr 2024, 16:46
- Forum: Midronome Bug Reports
- Topic: [R] Plugin / Sync Audio Coming back through Midronome's Headphone Out
- Replies: 2
- Views: 1817
Re: [R] Plugin / Sync Audio Coming back through Midronome's Headphone Out
closing this since no replies since January.
- 11 Apr 2024, 16:43
- Forum: Midronome Bug Reports
- Topic: [F] Midronome PLAY flashes after DAW is stopped when using 2.4.P.
- Replies: 9
- Views: 3036
Re: Midronome PLAY flashes after DAW is stopped when using 2.4.P.
Status: solved in Firmware 3.0 by removing 2.4.P. mode entirely.
(note: the 24P mode now starts without the 1-bar delay)
(note: the 24P mode now starts without the 1-bar delay)
- 09 Apr 2024, 14:53
- Forum: Potential future features
- Topic: ROADMAP for Firmware 3.0
- Replies: 4
- Views: 9902
Re: ROADMAP for Firmware 3.0
ETA is this month
- 09 Apr 2024, 12:03
- Forum: Midronome Bug Reports
- Topic: [F] MIDI Forwarding to MIDI Out 2 is not working on Mac
- Replies: 1
- Views: 24
Re: MIDI Forwarding to MIDI Out 2 is not working on Mac
This will be solved in Firmware v3.0 and up by adding extra input interfaces, ending with this configuration: 3 MIDI Outputs: (same as current) Commands MIDI Out 1 MIDI Out 2 3 MIDI Inputs: Clock Module Itf 1 Module Itf 2 Clock is the usual input where the clock is sent, as well as Start/Stop messag...
- 09 Apr 2024, 12:00
- Forum: Midronome Bug Reports
- Topic: [F] MIDI Forwarding to MIDI Out 2 is not working on Mac
- Replies: 1
- Views: 24
[F] MIDI Forwarding to MIDI Out 2 is not working on Mac
Short description of the issue : USB Midi Setup (devices connected to the Midronome and how): macOS Sonoma on M1 mac, Midronome plugged in using USB Steps to Reproduce : Simply try to use the USB forwarding interfaces MIDI Out 2, it does not forward, instead the USB-MIDI "Midi Out 2" acts...
- 28 Mar 2024, 12:20
- Forum: Questions about the Midronome
- Topic: Recording hardware into Ableton delay
- Replies: 1
- Views: 131
Re: Recording hardware into Ableton delay
Hi :) This does look like a very large delay indeed. You said the TR8S is connected via USB, but it is sync'ed to the Midronome, correct? If not -> clearly that's the issue :D If it is -> it could be the MIDI note you are sending from Ableton over USB which gets a delay. Make sure delay compensation...
- 22 Mar 2024, 19:31
- Forum: Potential future features
- Topic: Negative Offset/Shift/Latency
- Replies: 29
- Views: 14750
Re: Negative Offset/Shift/Latency
Hi Mark
No it is not. Add-on modules have been delayed by the release of Firmware 3.0 unfortunately.
They will probably out at the same time as the next batch, next summer
Simon
No it is not. Add-on modules have been delayed by the release of Firmware 3.0 unfortunately.
They will probably out at the same time as the next batch, next summer
Simon
- 14 Mar 2024, 08:59
- Forum: Potential future features
- Topic: Start/Reset for ANLG output
- Replies: 10
- Views: 6496
Re: Start/Reset for ANLG output
sorry for the late response, seems I am not getting email notifications from the forum. No worries at all, and if you want to receive notification emails you can turn them on here: https://forum.midronome.com/ucp.php?i=ucp_notifications&mode=notification_options Thanks for the long feedback abo...
- 14 Mar 2024, 08:54
- Forum: Feature requests (Discussions & debates)
- Topic: Analogue clock signal options
- Replies: 2
- Views: 66
Re: Analogue clock signal options
Thanks for creating a separate topic :) You did not follow the template though, so I am missing some information (in particular your firmware version). Could you please edit your post and follow this template: Short description of the issue : Setup (devices connected to the Midronome and how): Steps...
- 13 Mar 2024, 19:49
- Forum: Questions about the Midronome
- Topic: Hum Issue
- Replies: 2
- Views: 73
Re: Hum Issue
Yes this fit perfectly the description of this well-known issue.
Unfortunately it's a hardware issue, caused when you have a ground loop in your setup.
There are many workarounds and solution - see the linked post
Simon
Unfortunately it's a hardware issue, caused when you have a ground loop in your setup.
There are many workarounds and solution - see the linked post
Simon
- 11 Mar 2024, 08:55
- Forum: Questions about the Midronome
- Topic: Syncing OXI ONE to Midronome
- Replies: 19
- Views: 3448
Re: Syncing OXI ONE to Midronome
Hi Scott Very sorry to hear - we investigated this issue heavily with Jandt (who created this topic), I also spoke about it with Manu (who designed the OXI One). The conclusion is the original OXIs have a slightly different MIDI input design which is very sensitive to tolerances - if you get a newer...
- 11 Mar 2024, 08:40
- Forum: Questions about the Software Tools
- Topic: Ableton 12 + plugin?
- Replies: 1
- Views: 169
Re: Ableton 12 + plugin?
Ha glad to hear
I have not tested the plugin in Ableton 12 indeed, but I do not see any reason why it would not work
Let us know if there is anything else
Simon
I have not tested the plugin in Ableton 12 indeed, but I do not see any reason why it would not work
Let us know if there is anything else
Simon
- 11 Mar 2024, 08:36
- Forum: Potential future features
- Topic: ROADMAP for Firmware 4.0
- Replies: 5
- Views: 1000
Re: ROADMAP for Firmware 4.0
Hi Max :) That's fair, definitely a few months, not years. Difficult and complex features are the ones that take time, for example the one that is coming with Firmware 3.0. Once this is out I will start working on Firmware 4.0, and its difficult feature is the improved tap tempo, which is the only o...
- 05 Mar 2024, 12:07
- Forum: Questions about the Midronome
- Topic: Jitter using as master clock (hardware only)
- Replies: 2
- Views: 114
Re: Jitter using as master clock (hardware only)
Interesting! My guess is that when you activate sync, the beatbuddy syncs to the incoming clock (from the Midronome) but then generates its own clock for your looper, which gets out of sync from the original Midronome clock… ? Could you try re-arranging the wires to get the Midronome to send the clo...
- 05 Mar 2024, 12:04
- Forum: Questions about the Midronome
- Topic: PLAY button
- Replies: 1
- Views: 63
Re: PLAY button
Hi :) Thanks for the suggestion! I think this would be difficult, both because it might be specific to your setup but also because even if other people have the same setup they would need a different note so it needs to be configurable somewhere. The easiest workaround is to send the note you want o...
- 29 Feb 2024, 11:11
- Forum: Potential future features
- Topic: Start/Reset for ANLG output
- Replies: 10
- Views: 6496
Re: Start/Reset for ANLG output
I have been having reliability issues with my Korg SQ-1 when syncing it via analogue to the Midronome. Every now and then, it would jump a few steps and get out of sync. I see - great info! All your ideas seem to be very on point :) Would you mind creating a post about it in the “Midronome Bugs Rep...
- 29 Feb 2024, 11:06
- Forum: Questions about the Midronome
- Topic: Still strugglign with Midi Jitter/Delay in Ableton
- Replies: 26
- Views: 8948
- 19 Feb 2024, 01:15
- Forum: Questions about the Midronome
- Topic: Trying to understand syncing DAW/Midronome/Ext Hardware
- Replies: 14
- Views: 3932
Re: Trying to understand syncing DAW/Midronome/Ext Hardware
but all the jitter is still happening between the daw and midronome? so the midronome stabilizes it? Well no that's the point, the Midronome uses the audio clock as a reference, so the only jitter it gets is the audio clock's jitter (which is usually very low ) +/- 0.5 samples. When you sync stuff ...